Stainless Motors - YXN Series
Features | Specifications

Features

• Frame - 321 stainless steel, electro–polished for a superior finish. Paint free
• End Shields - Cast stainless 300 series alloy with provisions for condensation drains every 90º providing mounting flexibility.
• Base - Heavy duty, stamped, 300 series stainless steel welded to frame (Footless version available).
• Stator - Specially treated class "F" and "H" wire used with full slot liner material. Coil heads laced for improved mechanical strength. Stator tested before and after assembly providing optimum electrical integrity.
• Insulation - Non-hygroscopic, epoxy varnish with bore protection and phase insulation assures superior electrical strength.
• Hardware - 300 series stainless steel, high strength, with hex heads. Stainless steel provides exceptional corrosion protection.
• Bearings - Double sealed, oversized, and permanently lubricated. Rugged and sealed so they hold up in tough applications and minimize the effects of moisture on the bearings.
• Conduit Box - 300 series stainless steel, for exceptional corrosion resistance and ease of installation.
• Shaft - High strength, 400 series hardened stainless steel for exceptional torsional and shear strength.
• Certifications – CE listed.
• Energy Saving Design - Provided by electrically matched rotor and stator which reduce primary and secondary losses.

back to top
Features | Specifications

Specifications

SMC NORTH AMERICA - THREE PHASE HIGH EFFICIENCY STAINLESS STEEL MOTORS
C-face less base
Hp	RPM @ 60 Hz.	NEMA Frame	Model No	Ap'x ship weight	Eff'y @ Full Load	Full Load Amps	Encl.	Specifications
								DWG	PDF
0.25	1750	56C	YXN5614	28	78.0%	0.45	TENV
0.33	1750	56C	YXN5624	30	79.0%	0.55	TENV
0.5	1750	56C	YXN5634	29	80.0%	0.85	TENV
0.75	1750	56C	YXN5644	38	81.5%	1.15	TENV
1	1750	56C	YXN5664	43	82.5%	1.50	TEFC
1.5	1750	56C	YXN5674	44	84.0%	2.30	TEFC
2	1750	56C	YXN5684	48	84.0%	2.85	TEFC
1	1750	145TC	YXN5664-A	44	82.5%	1.50	TEFC
1.5	1750	145TC	YXN5674-A	48	84.0%	2.30	TEFC
2	1750	145TC	YXN5684-A	49	84.0%	2.85	TEFC
C-face with base
0.25	1750	56C	YXN5614D	29	78.0%	0.45	TENV
0.33	1750	56C	YXN5624D	30	79.0%	0.55	TENV
0.5	1750	56C	YXN5634D	32	80.0%	0.85	TENV
0.75	1750	56C	YXN5644D	35	81.5%	1.15	TENV
1	1750	56C	YXN5664D	44	82.5%	1.50	TEFC
1.5	1750	56C	YXN5674D	46	84.0%	2.30	TEFC
2	1750	56C	YXN5684D	50	84.0%	2.85	TEFC
1	1750	145TC	YXN5664D-A	46	82.5%	1.50	TEFC
1.5	1750	145TC	YXN5674D-A	49	84.0%	2.30	TEFC
2	1750	145TC	YXN5684D-A	50	84.0%	2.85	TEFC
230/460V, 60 HZ, CLASS F INSULATION, 1.15 SF, IP55 ENCLOSURE
SMC NORTH AMERICA - SINGLE PHASE STAINLESS STEEL MOTORS
C-face less base (Capacitor start)
Hp	RPM @ 60 Hz.	NEMA Frame	Model No	Ap'x ship weight	Eff'y @ Full Load	Full Load Amps	Encl.	Specifications
								DWG	PDF
0.5	1750	56C	YCN5634X	29	62.0%	3.9	TEFC
0.75	1750	56C	YCN5644X	38	73.0%	4.7	TEFC
1	1750	56C	YCN5654X	38	73.0%	6.8	TEFC
1.5	1750	56C	YCN5694X	48	75.0%	8.5	TEFC
C-face with base (Capacitor start)
0.5	1750	56C	YCN5634X-D	37	62.0%	3.9	TEFC
0.75	1750	56C	YCN5644X-D	39	73.0%	4.7	TEFC
1	1750	56C	YCN5654X-D	44	73.0%	6.8	TEFC
1.5	1750	56C	YCN5694X-D	49	75.0%	8.5	TEFC
115/230V, 60 HZ; CLASS B INSULATION, IP55 ENCLOSURE, W/O OVERLOAD PROTECTION